Rust
Last updated
Last updated
[ WEAPON ] No Recoil - F2 No Spread - F4 (May be blocked on some servers (use with caution)) Automatic - F5 No Sway - F6 Insta Eoka - F12
[ ADMIN ]
Box ESP - F8
If the boxes do not turn on, write this command to the console (the enabled admin flag may be required) - culling.toggle 1
Debug Camera - F9
Admin Commands: Do not use the noclip command, you will be instantly banned from the server (any) Debug camera - bind [] debugcamera Some servers may block the camera, this bind may help you -
bind [] camlerp 1;camspeed 1;camlookspeed 1
Disabling textures - bind [] layer.toggle World;layer.toggle Terrain;layer.toggle Tree;layer.toggle Construction;layer.toggle Clutter
Always Day - bind [] admintime 12 or 0 Only 2 keys are available for setting - O or P. example - bind p debug camera, bind o admintime 12
Chams - F10
Enter this command into the console so that the chams do not disappear -
culling.entityminculldist 333 or culling.toggle 0
[ CLIENT ]
Spiderman - F11
Review 3D boxes -
DOWNLOAD LOADER STRAIGHT TO USB AND DON’T PUT IT ANYWHERE ELSE, CAN CAUSE BANS OTHERWISE !
Make sure your antivirus is disabled before downloading.
UNPLUG YOUR USB BEFORE STARTING THE GAME, YOU WILL BE BANNED OTHERWISE !
Copy the loader to a USB flash drive.
Place Loader onto a USB drive. Do not run it from your local disk, as it may lead to a ban.
Run the loader as administrator directly from the USB flash drive.
Right-click the loader and select "Run as administrator."
Enter your purchased key.
Input the key you received during purchase.
Click the INJECT button.
Wait for the injection process to complete. The loader will close automatically once the injection is successful.
Safely eject the USB flash drive.
After injection, remove the USB drive from your PC to minimize detection risks.
Game Exit - Unload the cheat.
After you exit Rust or if you need to close the cheat, press the "End" key to unload it safely.
⚠️ Important: Always run the loader from a USB drive and disconnect it after injection. Launching it from the local disk or leaving the USB connected may increase the risk of a ban.
If you use a spoofer, then you need to first launch the loader, then GO INTO RUST, GO TO ANY SERVER AND EXIT RUST. Next, go into the loader, press INJECT and go into the rust. This must be done in order to avoid a conflict between the bypass and the spoofer. If you don't use a spoofer or use a permanent spoofer, you won't need these steps.
If you are unable to inject the cheat, please refer to the troubleshooting section to solve your problems. But if the problem persists, you can write us a ticket on discord and we will help you.
